How to turn off the water to your toilet in Australia

How to turn off the water to your toilet in Australia

The toilet shut-off valve can be a lifesaver in case of emergency. It’s also very helpful when it comes to inspecting, testing and repairing your toilet. Our expert technicians are always surprised by how many homeowners they encounter in the field who are unaware of this important plumbing fixture’s existence. This conspicuous fitting is surprisingly […]

How to turn off the water to your toilet in Australia

The toilet shut-off valve can be a lifesaver in case of emergency. It’s also very helpful when it comes to inspecting, testing and repairing your toilet. Our expert technicians are always surprised by how many homeowners they encounter in the field who are unaware of this important plumbing fixture’s existence. This conspicuous fitting is surprisingly easy to overlook, yet vitally important. The need for emergency plumbing repair should be avoided at all costs – being able to take action in case of an emergency can be the difference between only a minor plumbing mishap and major property damage.

Left hand side down the bottom of a toilet is where you might first look for the valve

Toilet shut-off valves can be located in a few different places, but the most common place to find one is on the bottom left side of the toilet. You’ll also likely notice a pipe coming from below the toilet tank and connecting to the wall. This is where you’ll find your valve. Some toilets might have this same connection underneath the floor as well. In either case, your valve will most likely look like a football and may have some markings or words printed on it for easy reference.

How to turn off the water to a toilet in Australia

Toilets in Australia have a water supply pipe running to them. There will be a valve on this pipe, which can be turned to cut off the water supply to the toilet. The valve is usually located behind the toilet, or in a cupboard under the sink.

Steps to turning off the water to your toilet

This toilet’s shut of valve is inside the tank lid

1. Locate the water shut-off valve for your toilet. This is usually located behind the toilet, near the floor or in the tank lid. 

2. Turn the water shut-off valve to the “off” position. You may need to use a wrench to turn it if it is very tight. In Australia off would be turning it to the right. ‘Righty tighty lefty loosey’.

How to turn off the water to your toilet in Australia
In Australia, turn the valve to the right to turn off

Why you might need to turn off the water to your toilet

There are a few reasons why you might need to turn off your toilet’s water supply. If your toilet is leaking, you’ll need to turn off the water to make repairs. If you’re going on vacation and don’t want your toilet to use up all the water in your home, you can turn it off. Additionally, if there’s a problem with your home’s main water supply, you’ll need to turn off all the water in your home, including your toilet.

Can you shut off the water just to the toilet?

Yes, you can shut off the water just to the toilet. You will need to locate the water shut-off valve for the toilet, which is usually located behind the toilet or under the sink. Once you have located the valve, turn it clockwise to shut off the water.

How do I turn off the water in my bathroom only?

Most bathrooms have a shut-off valve near the toilet or sink. To turn off the water in your bathroom only, simply turn the knob or wheel on the shut-off valve in a clockwise direction until it is completely closed. 

If you cannot find a shut-off valve, or if it is not working properly, you may need to shut off the water to your entire home by turning off the main water supply valve.

Why is my toilet still running with the water off?

If your toilet is still running after you turn the water off, it could be because the float arm is not properly positioned. When the float arm is not positioned properly, it can cause the water to keep running. 

Another possibility is that the flush valve is not seated properly. With the water off, try flushing the toilet. If the water continues to run, then the flush valve is not seated properly and will need to be adjusted.

How long can you turn off the water to toilet?

Most toilets can go about two or three days without being flushed, but after that, they start to become unhygienic. 

If you’re going to be gone for more than a few days, it’s best to either have someone come by to flush the toilet for you, or to empty the tank and bowl and clean them before you go. 

This will prevent any nasty surprises when you return!

How to turn off the water to the toilet when there is no valve

If your toilet doesn’t have a shut-off valve, you’ll need to turn off the water at the main supply line. Locate the main water shut-off valve—it’s usually near where the water main enters your house—and turn the handle clockwise until it won’t turn anymore. 

Once the water is shut off, flush the toilet to empty the tank.

Is it bad to shut off the water to toilet

No, it is not bad to shut off water to the toilet. If you need to make a repair or if there is a clog, shutting off the water can help to prevent further damage.

How to turn off the water to the toilet with a plastic valve

Most shut-off valves for toilets are located behind the toilet, near the floor. You can usually tell if the valve is metal or plastic by the handle. If the handle is metal, turning it clockwise will shut off the water. 

If the handle is plastic, you will need to push it in and turn it clockwise. If you’re having trouble finding the shut-off valve, you can always call a professional plumber for help.

How to turn off the water to the toilet push/pull

It’s important to know how to turn off the water to your toilet in case of an emergency. The water shut off valve is usually located behind the toilet or near the toilet. Once you have found the water shut off valve, turn the valve to the right to turn off the water. 

If you can’t find the water shut off valve, you can also turn off the water to your home at the main water shut off valve.

Is it ok to turn off water to the toilet for a week?

No, it is not ok to turn off water to the toilet for a week. This could lead to a sewage backup and possible flooding. If you have a septic tank, turning off the water to your toilet could lead to your septic tank overflowing and spilling into your home. 

This would create an unsanitary and dangerous situation for you and your family. If you must turn off the water to your toilet, be sure to empty the tank completely and often to avoid any problems.

Is it ok to turn off the water to the toilet overnight?

There is no definitive answer, as there are pros and cons to both leaving the water running and turning it off. Some people argue that leaving the water running can waste a lot of water over time, while others argue that it’s better to leave it running in order to avoid sewer line backups. 

Ultimately, it’s up to the individual to decide what’s best for their home.

If you have any toilet problems and need a plumber, give us a call, At Your Maintenance.